30A DC Motor Remote Controller with Manual Button and Limit Switch Function

With high power of 30A. Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V /24V.
You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.

The remarkable characteristic of this controller is that its manual switch and limit
switch, which meet your different requirements.

Comments

Post a Comment

Popular posts from this blog

How to Use an External Limit Switch with a Linear Actuator

Image
An  external limit switch  is a very handy and cost effective means of controlling the travel of a  linear actuator . Here we will go over how to use an external limit switch with a linear actuator. Most electric linear actuators are made with built-in limit switches. This means you are able to adjust the travel of the stroke to your precise desired position. Not all linear actuators are built limit switches. So what do you do when the linear actuators stroke is longer than you need? Installing an external limit switch is the simplest and most affordable method to control the travel in electric linear actuators where the limit switch is either non-adjustable or non-existent. There are three ways to control the stroke: Limit extension Limit retraction Limit both extension and retraction What is a Built-In Linear Actuator Limit Switch? All our linear actuators have internal limit switches at the fully extended and retracted positions. These limit switches ensure that when ...
Read more

What is Toggle / Momentary / Latched Modes

Generally there are three working modes for rf remote controls : toggle, momentary, latched. Toggle mode is used most often. Controlling lamp, for example, press the button of remote, turn on the lamp; press the button again, turn off the lamp. Momentary mode can be set to control rolling blind or rolling door. You need to press and hold the button of remote to make the blind or door open/close. Both toggle and momentary mode are motivated by single relay, which means you can work these two modes with single button remote. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time, e.g. press remote button A, relay A will be on, and relay B will be off; press remote button B, relay B will be on, and relay A will be off. To be more specific, when you control the lamp by latched mode, you should prepare at least two buttons remote. Press button A, the lamp is on; press button B, the lamp is off. Information from: htt...
Read more

Touch Sensitive Light Switch with LED Indicator

Image
This touch sensitive light switch with LED indicator is new product from online store switchtolight.com . It is truly unique. With perfect white / black crystal glass panel, it will create an exclusive ambiance to any room or setting. Easy to install, so you can DIY the wiring job and save the money. No complicated operation. Touch slightly the switch icon to turn on/off the light. Besides light on/off control function, it also has other special functions. Dimming Function With dimming function you can adjust the brightness of the light by a simple touch. It is useful for adjusting light in a room for different purposes. Two Way Control Function With two way control function you can control one light, or two lights, or more lights as well, from two different places. So you are free from the trouble of running back and forth to turn on/off the light. All these functions can also be achieved by a mini remote control, which gives you more convenience and comfort. 
Read more