Home Automation Control

Manually control extending and retracting of the electric linear actuator through a wired handle with DC 12V 24V power adapter . Product parameters: Input voltage: AC100~240V Output voltage: DC12V or 24V optional Maximum output current: 6A/DC12V or 5A/DC24V optional Wired control handle with two buttons, momentary work mode. Suitable for DC 12V or 24V 500N or 2000N series of linear actuators. Wiring: Connect the wired control handle to the power adapter and linear actuator, and then connect the plug of the power adapter to AC power supply. Operating: Press and hold the button "Extended" on the handle: The linear actuator will extend outward; Release the button: The linear actuator stops extending outward. Press and hold the button "retracted" on the handle: The linear actuator retracts inward; Release the button: The linear actuator stops retracting inward.

What Type of Manual Switch Do You Need? We have a lots of types of manual electrical switches, so how do you know which one is best for controlling a  12V or 24V linear actuator . As you are most likely wanting to extend and retract your linear actuator, you’ll want to use a 3 position toggle switch (Double Pole Double Throw (DPDT) ON-OFF-ON switch), or manual controller with wire handle. 3 Position ON-OFF-ON Toggle Switch 3 position toggle switch will allow you to change the direction of the input voltage to the actuator, which is needed to change directions, while a double throw gives you two ON positions, and OFF position; one ON position for extension, the other ON position for retraction, and OFF position for stop. Maximum load current is 15A.     Manual Controller with Wire Handle 1)  24V Manual Controller with Wire Handle for 2000N Linear Actuator The manual controller input voltage is AC100 ~ 240V, DC 24V output and maximum output current is 3A;The contr...

Question from customer: I am searching for a solution to send a wireless signal across roughly 300m. The receiver will be 12v powered. The transmitter will be used turn on with a relay then send a wireless signal to the receiver. The receiver in turn will activate a 12v alarm and strobe system. These need to be sending while in alarm and stop sending when the relay shuts off. Answer: Our suggestion is 2000M RF remote control apply for device control another device (S1L-DC12-ANT2+CB-2N). The remarkable feature of its transmitter is that its triggering method is connection and disconnection of two wires (Black&Red). This transmitter & receiver set can be used in such a situation when you want to use an electrical device to remotely control another device. It has extensive application range. It controls lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with voltage AC110~240V or DC0~28V. You can turn on/off the receiver with ...

With high power of 30A. Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V /24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. The remarkable characteristic of this controller is that its manual switch and limit switch, which meet your different requirements.