Home Automation Control

Question from customer: I need a 2 channel receiver with 2 remotes 1 channel. One remote control activates the channel A receiver on the receiver and another remote to turn on the channel B on the receiver. Is it possible with the CWB-1 model? And which receiver would like to recommend? Answer: We recommend 2 channel12V multi-mode receiver (S2U-DC12) and two waterproofwireless 50m remotes (CWB-1). We set configured code for them so that they can work together. The receiver is 12V activated and has two relays. When it works with that transmitter, its transmission distance can reach 50m in the open air. There is only one button on each transmitter. It can control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors, doors...

Question from customer: I want a kit radio module 1 channel (12V), can transmit the state of a dry contact input (on transmitter). This is to retrieve the status of a motion detector. Distance 60m open field. Answer: We recommend 1 channel 12V rf receiver and transmitter with dry contactinput (S1L-DC12-ANT2 & CB-2N ). The very special design is its transmitter with a dry contact input aside. The triggering method of this transmitter is connection of two wires on it. There is only one channel at that relay on the receiver. The output contacts of relay are normally open and closed. Working distance of transmitter and receiver with external extend antenna are 2000M / 6000ft (theoretically).     Wiring: Wires on the transmitter should be connected to the contacts of motion detector (original device). The normally open contacts B&C of receiver should be connected to the device being controlled. Maybe you can wire a lamp to the re...