Home Automation Control

About the switch This Touch Time Delay Wall Light Switch can be used for bedroom lamps, table lamps, bedside lights, fans and so on. If you want to master the closing time of these appliances better, it is your really right choice. The switch is widely applied to apartments, hotels, government institutions and residential buildings, which does not require continuous use of ligths. It is easy to install and use, avoiding long light time and saving energy. How Does it Work? It is easy to use the switch. Just do as follows: Touch the on/off control icon on the switch surface, turn on the lamp; touch the icon again, turn off the lamp. Press the time control icons, the small red indicator will flash twice and keep lighting, which means success of setting lighting off time delay.  Press the time control icons repeatedly, the delay time will be cumulate automatically. The lamp will turn off automatically if the cumulating time is up. The longest delay time is up to 4 hours. Note: Y

Following installation is suitable for all kinds of single pole wall light switches, such as touch light switch , remote touch light switch , two way touch light switch , touch timer switch , etc.  Firstly, shut off the power to the circuit and remove the switch cover with screwdriver. Secondly, Connect the wires to the switch’s screw terminals, do as below: Thirdly, Fix the switch to internal box with two screws. Finally, fix the cover.

General Description: This remote touch two-way switch can control two sets of lights by working with another same two-way light switch. It can be touch or remote controlled. With the mini remote control, the user is able to control lights in different rooms, without the need for going around to turn on/off the lights by hand. Its perfect white crystal glass panel creates an exclusive ambiance to any room or setting. Specific Parameters: Dimension: 86mm*86mm*37mm Material: Crystal Glass Panel Operating Voltage: AC110V~250V/50Hz/60Hz Maximum Current for Each Gang: 5A Minimum Load Power for Each Gang: 15W Maximum Load Power for Each Gang: 1000W/220V or 600W/120V Self Consuming Power: Less than 0.1mW Operating Environment: -30~70 Centigrade; Less than 95%RH Lifelong: 100,000 Times of Operation Using with all types of lights including Incandescent lamps, Halogen lamps, Fluorescent lamps, Energy saving lamps. Note: The switch is not suitable for LED lamps or ind