Home Automation Control

This is the 4 channel multi-mode dc RF remote control kit. Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are 4 working modes for your requirement. With the external extend antenna, its working distance can reach 2000m(6000ft) in open field. Operation Video:

We will try to make 2 motion detector led lamps with infrared motion detectors (W-01) and 2 channel rf receiver with time delay function (S2DA-DC12). The working distance of motion detector is 100m (open field). This delay time is adjustable and user-selectable. Delay time can be adjusted as you like within 0 second~99 hours. Operation Video:

Question from customer: I want to use this remote kit to operate 4 ea.-12 volt flood lights on my RV (recreational vehicle) from inside my automobile if backing up at nighttime. I would keep one remote in my truck and one in the RV. Will this be a problem that the remote inside my truck will be at a distance of about 50 feet from the receivers inside the RV? Answer: We recommend you 4 models of high power dc remote switch with direct power output (S1PX-DC12) and 2 long range transmitters (CB-4). Direct power output; controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. When it pairs with the long range transmitter, the working distance will reach 500m (1600ft) in the open field. There is no need to worry about the distance. The most important point is that

Question from Customer: Hello, I would like some help to decide on what system to choose. We have a siren in a building 750m away that we would like to trigger, it is 240v. I would also like to use the same remote to activate a 12v siren 1.2km away. Is it possible for one remote to trigger two different sirens? Answe r: We recommend you two different receivers, one is long range ac power direct output receiver (S1X-AC220-ANT2), and other is long range dc power direct output receiver (S1X-DC12-ANT2). AC receiver is used to connect to 240V siren. DC receiver is used to connect to 12V siren. You can only use 2-Button transmitter (CB-2) to control all of them. With the extended external antenna, both receivers’ working distances reach 2000m (6000ft). Usage : There are three working modes in each receiver. 1) Setting control mode Toggle: Only connect Jumper-2. Press button 1: Turn on the relay. Press button 1 again: Turn off the relay. 2) Setting control mode Momentary: Only conne

A beacon is a light or fire on the hill or tower which acts as a signal or a warning to help guide navigator to their destination with safety. It is also lighthouse. One customer said, “I’m looking for a system which can remotely control (200m max) ignition of a lighthouse in 24 V dc”. We recommend him the model of single channel 24V power output RF remote (S1X-DC24-ANT2 +1CB-2). Single channel is for one device. 24V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field. There are 3 control modes. They are Toggle, momentary and latched. Setting control mode Toggle: Only connect Jumper-2. 1) Press big button: Turn on the relay. Press big button again: Tu

A brand new 2 channel 12V toggle remote control kit (S2RX-DC12 & C-2) is promoting now. The receiver is installed in a black waterproof case. Six colors‘ wires are connected inside terminals of the receiver. Wires are bound together and stuffed in black connection wire.The connection wire outside of the case is 20 cm. Wireless control 12V electronics including lights, LEDs, relays, dc motors and other low current devices.You can control receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. This video aims to show you how to control 2 led lamps. Wires: Red    =  Input +12V Black  =  Input Ground (-) Yellow =  Output 1 +12V Brown  =  Output 1 Ground (-) Blue   =  Output 2 +12V Green  =  Output 2 Ground (-)

With high power of 30A. Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V /24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. The remarkable characteristic of this controller is that its manual switch and limit switch, which meet your different requirements.

This 2CH RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on. We will try to show you how to control positive and reversal rotation of an AC motor with this remote module.

It is the 12 V one channel latched mode remote control. It is also activated by 12V power supply. Paired with long distance transmitter CB-2, its working distance can be 1000m (3000ft). There is no need to go up and down the mast to turn device on and off. Using a remote controller to control device, it is very convenient to you. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. So the big button of this transmitter only turns on the device when you press. And the small button only turns off the device. We made a demonstration to show how to use this remote controller.

The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. You also can choose external antennas for them. With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.