Home Automation Control

It must be better using elegant touch wall mounted switch to control ac motor for electric skylight / blind. They look more clear with LCD screen and please to your eyes. This video tells you how to wire and operate. It's so easy that you can even DIY in your home.

The video will show you how to use a safe transmitter receiver kit to make a remote control electric fireworks ignitior, which reduces accidents like skin burn and accidental explosions. pecification: Control Mode: Momentary (Press and hold -> On; Release -> Off) Operating Voltage: DC12V±1V Working Voltage Range of Relay: AC110~240V or DC0~28V Maximum Working Current: 5A Remote Control Distance: 100m / 300ft (theoretically) Power Supply of Remote Control: 1 x 23A -12V battery The transmitter receiver kit with momentary control mode easily can be found at http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_244_262&products_id=308

We try to use a dc12v rf transmitter receiver kit remotely control a dc12v led light strip. Watch the video. Easy to install and operate. Remote distance can be 100 meters theoretically.

Light Switch Installation: 1. Shut off the power to the circuit and remove the switch cover with screwdriver. 2. Connect the wires to the screw terminals. (Terminal L5 and L6 are not used now.) 3. Fix tightly the switch to internal box with two screws. 4. Fix the cover. Warning: 1. Please turn off power before installation and dismantlement, especially when fixing the switch cover. 2. After turning on power, you have to wait about 30 seconds before operating the switch. 3. Doing the Installation and dismantlement must be professional. 4. Check the circle condition before installation. 6. Dismantle the switch to avoid ruin as the circuit is testing. 7. Avoid shock, wateriness, hot, and knocking when installing and using the switch. 8. Forbid wet cloth, chemistry and scour water when cleaning. 9. Over loading is forbidden. 10. Circuitry which the switches installed in should be set properly. 11. Do not use metal box for installation, it maybe short...

Question: I want to control a 12V motor to run forward and reverse in order to extend and retract a little sign. Can this controller be programmed to stop running the motor (once the sign is out and in fully)? I don’t want to burn out motors once they reach the end of the track. If not, what do I need to buy to control my motor the way I need? Answer: We recommand model 0020016 (S1FD-DC12 & CA-4) . This model is a reversing controller, with forward-reverse-stop capability. You can rotate the motor in the positive or reversal direction with the transmitter from any place within a reliable distance, wireless signal can pass through walls, floors and doors. It has two limit switches, when the rotation is overdone, the limit switch S1 or S2 will be activated, then the motor will stop automatically.

You wanna change your old and out of fashion light switches? Undoubtedly, this floral design glass panel light switch is a better choice. It has beautiful outlook, clean and attractive. With Chinese-style floral design, it will inspire you some mysterious feeling. It is suitable for on/off lights, easily operated by touch control. Simple to install using your existing electrical wiring . Swap out your old light switch and replace with this switch.   

Here we talk about the remote distance of s1t/m/l-dc12 serie. Most often we use transmitter of 100m remote distance to match with the receiver, our C serie, for example. But if you want longer distance, we have other transmitters such like CP serie (500m theoretically), CB serie (1000m theoretically); or you can choose to solder antenna. There are two kinds of antennas in our store: external telescopic antenna , mount magnetic antenna. See the following diagram, the remote distance will be different for different model combination of transmitter receiver: Note: ANT1 – external telescopic antenna. ANT2 – mount magnetic antenna. Information from http://www.rfcontrolsystem.com

This rf remote transmitter receiver works with three control modes: toggle, momentary and latched. You can control the receiver by transmitter from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Applications include remote controlling light, motor, garage door, gate and so on with voltage of AC110~240V or DC0~28V. Controlling light, for example, you can work with toggle / latched mode. Toggle: press the button on transmitter, turn on the light; press the button again, turn off the light. Latched: press one button on transmitter, turn on the light; press another button, turn off the light. Widely used for outdoor light or LED light. Remote control kit with momentary mode is often used to control motor open/close for electrically operated door/lock/window/blind. Press and hold the button on transmitter, open the motor; release the button, close the motor. Other parameters: Coding Type: Fixed code by soldering Operating V...

This infrared detector & rf receiver kit is suitable for controlling outdoor lamp. An interesting application is to automatically control video shoot. Just change the following lamp to the video camera . When people (or animal) moves around the detection range, the video camera will automatically work. Receiver specification: Model No.: S1D-DC12 Channel: 1 CH Control Mode: Delay (Press -> ON; Then OFF after the delay time) Adjustable delay time: 2~40 seconds Coding Type: Fixed code by soldering Operating Voltage: DC12V±1V Working Voltage Range of Relay : AC110~240V or DC0~28V Maximum Working Current: 5A Infrared detector specification: Working distance: 100 m (Open field) Detection distance: 10m Detection range: Fan-shaped angle 110° Decode: Fixed code by Pins Alarm time: 2 seconds Battery: 6F22-9V battery (Included, useful life time 6-12 months). Indication of low battery