Home Automation Control

Manually control extending and retracting of the electric linear actuator through a wired handle with DC 12V 24V power adapter . Product parameters: Input voltage: AC100~240V Output voltage: DC12V or 24V optional Maximum output current: 6A/DC12V or 5A/DC24V optional Wired control handle with two buttons, momentary work mode. Suitable for DC 12V or 24V 500N or 2000N series of linear actuators. Wiring: Connect the wired control handle to the power adapter and linear actuator, and then connect the plug of the power adapter to AC power supply. Operating: Press and hold the button "Extended" on the handle: The linear actuator will extend outward; Release the button: The linear actuator stops extending outward. Press and hold the button "retracted" on the handle: The linear actuator retracts inward; Release the button: The linear actuator stops retracting inward.

Use   1 channel DC 30A long range wireless remote control linear actuator switch kit   with RF transmitter and receiver to synchronously control two 12V or 24V   electric linear actuators , these two linear actuators are the same working voltage, telescopic speed and stroke. Used with linear actuators for long distance wireless control the pergola, car, truck, trunk, lifting platform, massage chair, massage seat, solar tracker, sofa, etc. Operating: Press button ▲ on the remote: The two electric linear actuators extend outward Press button ■ on the remote: The two electric linear actuators stop extending outward Press button ▼ on the remote: The two electric linear actuators retract inward Press button ■ on the remote: The two electric linear actuators stop retracting inward

Electric Linear Actuators: https://www.remote-control-switch.com/collections/linear-actuators Wireless Remote Control Switch Kit: https://www.remote-control-switch.com/collections/remote-linear-actuator-switch/products/2-channels-30a-dc-rf-wireless-remote-control-switch-for-12-24v-electric-linear-actuator The DC RF wireless remote control switch kit is used to control the extension and retraction movement of 12V or 24V electric linear actuators . Used with linear actuators for long distance wireless control the pergola, car, truck, trunk, lifting platform, massage chair, massage seat, solar tracker, sofa, etc. The operation is as follows: 1) The control mode is momentary mode Press and hold the ▲ button on the left: The linear actuator 1 extends outwards; Release button ▲ on the left, Linear actuator 1 stops extending outwards. Press and hold the ▼ button on the left: The linear actuator 1 retracts inwards; Release the ▼ button on the left. The linear actuator 1 stops retracting inwar...

What Type of Manual Switch Do You Need? We have a lots of types of manual electrical switches, so how do you know which one is best for controlling a  12V or 24V linear actuator . As you are most likely wanting to extend and retract your linear actuator, you’ll want to use a 3 position toggle switch (Double Pole Double Throw (DPDT) ON-OFF-ON switch), or manual controller with wire handle. 3 Position ON-OFF-ON Toggle Switch 3 position toggle switch will allow you to change the direction of the input voltage to the actuator, which is needed to change directions, while a double throw gives you two ON positions, and OFF position; one ON position for extension, the other ON position for retraction, and OFF position for stop. Maximum load current is 15A.     Manual Controller with Wire Handle 1)  24V Manual Controller with Wire Handle for 2000N Linear Actuator The manual controller input voltage is AC100 ~ 240V, DC 24V output and maximum output current is 3A;The contr...

An  external limit switch  is a very handy and cost effective means of controlling the travel of a  linear actuator . Here we will go over how to use an external limit switch with a linear actuator. Most electric linear actuators are made with built-in limit switches. This means you are able to adjust the travel of the stroke to your precise desired position. Not all linear actuators are built limit switches. So what do you do when the linear actuators stroke is longer than you need? Installing an external limit switch is the simplest and most affordable method to control the travel in electric linear actuators where the limit switch is either non-adjustable or non-existent. There are three ways to control the stroke: Limit extension Limit retraction Limit both extension and retraction What is a Built-In Linear Actuator Limit Switch? All our linear actuators have internal limit switches at the fully extended and retracted positions. These limit switches ensure that when ...

Sometimes you may not want to use the entire stroke length of a linear actuator, to restrict the travel distance you will need our  external limit switch . How external limit switches work External Limit switches are spring loaded buttons that when pressed open / close the circuit, stopping the motor from spinning any further. These switches have 3 terminals (NC, NO and COM). By connection the external limit switches to the limit control terminals of remote control switch.When the actuator collides with the external limit switch, cut off the power supply of the electric linear actuator motor. In-built limit switches All our  linear actuators  have internal limit switches at the fully extended and retracted positions. These limit switches ensure that when you fully extend (or retract) the actuator it will automatically shut off preventing the motor burning out and/or doing damage to the body of the actuator. However, these limits not adjustable. If you want to: Limit exte...

What is included in a Linear Actuator Kit? We get many people asking for a Linear Actuator Kit so we thought we would put together some different options for an Actuator kit. The main components that come in the Kit are the Linear Actuators, some for of attaching them (Mounting brackets). Some type of controls (switch) and a form of power supply. When it comes to Controlling the Linear Actuators, there are several options and each option is typically application specific, or user preferred. For example some people want a manual switch and others prefer a remote wireless control in their Linear Actuator Kit. Secondly there are severals of type of Linear Actuators to choose from, and for every Actuator you then have the further complication of deciding which Stroke length, which speed and force option and even the type of voltage you require. Option 1 - Simple and Practical Linear Actuators Kit This kit includes the Linear Actuators (there has 500N, 2000N, 6000N, high speed, etc....

The Main Structure: An  electric linear actuator  consists of a DC motor, a series of gear (Reduction gear), two limit switches and a Lead screw including a nut. The Linear Actuators'enclosures: Linear Actuators have different IP ratings. The lower the number the lower the protection is. IP-54 offers basic protection such as dust, and a higher IP-65 rating offers a water proof protection and ideal for outdoor use. Linear Actuator Works: An electric linear actuator is a device that converts the rotational motion of a motor into linear motion. This will provide both push and pull movements via the main extending shaft on the Actuator. This pushing and pulling action makes it possible to lift, drop, slide, adjust, tilt, push or pull things, simply by pushing a button. Stroke Control Device: The gear on the DC motor drives a series of gear (Reduction gear) to rotate, so that push and pull movements via the main extending shaft on the Actuator. When it reaches the maximum stroke...

Question from customer: I need a 2 channel receiver with 2 remotes 1 channel. One remote control activates the channel A receiver on the receiver and another remote to turn on the channel B on the receiver. Is it possible with the CWB-1 model? And which receiver would like to recommend? Answer: We recommend 2 channel12V multi-mode receiver (S2U-DC12) and two waterproofwireless 50m remotes (CWB-1). We set configured code for them so that they can work together. The receiver is 12V activated and has two relays. When it works with that transmitter, its transmission distance can reach 50m in the open air. There is only one button on each transmitter. It can control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors, doors...

Question from customer: I want a kit radio module 1 channel (12V), can transmit the state of a dry contact input (on transmitter). This is to retrieve the status of a motion detector. Distance 60m open field. Answer: We recommend 1 channel 12V rf receiver and transmitter with dry contactinput (S1L-DC12-ANT2 & CB-2N ). The very special design is its transmitter with a dry contact input aside. The triggering method of this transmitter is connection of two wires on it. There is only one channel at that relay on the receiver. The output contacts of relay are normally open and closed. Working distance of transmitter and receiver with external extend antenna are 2000M / 6000ft (theoretically).     Wiring: Wires on the transmitter should be connected to the contacts of motion detector (original device). The normally open contacts B&C of receiver should be connected to the device being controlled. Maybe you can wire a lamp to the re...

We recommend this kind of remote controller- dc rf remote controller kit with timer (S1D-DC12 & C-1), which operates in the 315/433 MHz frequency and is actuated by DC 6V, 9V, 12V and 24V. There is an adjustable resistor being installed in it. Working time of this remote controller can be adjustable between 2-40 seconds by using a screwdriver to twist the top of resistor. It can be applied to controlling lights, motors, fans, electrically operated doors/ locks/ windows/blinds/ cars or other appliances with voltage AC 110~240V or DC 0-28V. We’d like to show you the procedure of controlling dc led lamp.

Vibrating alerts are primarily used when a user (deaf people or aged people) cannot hear the ring tone (a noisy environment or through hearing difficulty) or want s a more discreet notification. Vibrating alerts is used in mobile phones. If you put vibrator to a hard surface, it will be louder than a ringtone. In fact, we integrate vibration and beep function into one item. So we’d like recommend this kind of 1000m rf tri-mode wireless vibrator kit (12Z-06 & CB-12). It includes 12 vibrators and a 12-button transmitter. This vibrator kit’s transmission distance is about 1000m. There are four working modes in them. They are vibration, beep, vibration and beep. Here is the usage of vibrator kit. The first step is learning. 1) Press and hold the learning button of the receiver(vibrator) for about 5 seconds, then release the button when LED light is on, the receiver (vibrator)is in the status of Learning. 2) Press button of remote control within 10 seconds, if LED light flashes t...

Question from customer: “I have a waterfall water feature that currently has an 110v 250W pump that run from 7AM until 10PM. I would like to save more energy by having these pumps turn on by detecting motion near the water feature. 110 degree detection, within 30 feet would be sufficient. The more intelligent, the better (i.e. body/heat/motion/mass detection). There is no need to run a waterfall water feature when no one is there to enjoy it. What do you recommend?” Answer: We recommend wireless infrared movement detector and receiver with time delay function (S1DA-AC220-ANT2&W-01) to you. This kit is 220V actuated. With external extended antenna, it can work within 6000ft in the open field. With adjustable time delay function, you can adjust delay time from 0 second to 99 hours. The motion detector can detect any movement within 10m. Detection range is fan-shaped angle 110°. We’d like show you how to use this kit. Steps: 1 Using screws to fix the bracket on the wall to fav...

This wireless calling system has 99-channel mode among working modes. In this mode, one receiver host can works with 99 calling transmitters. The receiver should pair up with three or four-button transmitter . We’d like to show you the procedure. We prepare a receiver host, 4-button calling transmitters, manager remote and 9V power supply for receiver host. There are three steps to pair up transmitters and receiver host. Working mode setting: After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “5″ (Mode 5: 99-channel mode), press button “2″ to turn back to setting menu. Calling button pairing: Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “001″, Press any button of transmitter (except “Cancel”), the speaker will sound “successful registratio...

Question from Customer: “I am looking for a remote controller to start and stop a motor of 1/2 horsepower from a distance of 250 – 300 feet. The motor is 115 volts AC. Which unit is correct for this application?” Answer: We recommend 1 channel AC 30amps 2000m Remote Cont roller (S1PX-AC220-ANT2 & CB-2) to you. There are 3 working modes in this kit. They are toggle, momentary and lathed mode. You can choose momentary or latched mode. Momentary Mode : Only connect Jumper-1. Press and hold big button: Turn on the relay, terminal OUT outputs AC power, motor starts. Release big button: Turn off the relay, terminal OUT no output, motor stops. Latched Mode : Do not connect Jumper-1 and Jumper-2. Press big button: Turn on the relay, terminal OUT outputs AC power, motor starts . Press small button: Turn off the relay, terminal OUT no output, motor stops. The controller’s transmitting distance can be about 2000m in the open field. With its high amp load-30amp, it is enough stron...

Question from customer: Recently, I am ready to manager a large new restaurant. I want to divide it into different areas so as to be convenient to customers and waiters. So I need some calling system to be used in restaurant for customers and waiters. The transmitter can be used by customer. The receiver can be put to reception desk. When there is customer calling from any area, he can press the button to notify the waiter and customer will get help as soon as possible. Answer: We recommend wireless calling system. They include a 999-channel receiver host . You can choose this 3-button calling transmitter . That is to say, you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. According to your requirement, you can choose “Area mode”.

Overview: My plan is to be able to remotely control an RC motor forward and backward wirelessly with the remote. I was thinking one receiver and one remote, but which products would I be able to do this with. Solution: We recommend the model of DC power motor controller (S1FC-DC12&CV-4-2) to you. This DC RF motor remote control features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for any RC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals. The kit’s transmitting distance is up to 500M. Connect power wire to terminals “+” and “－”. Connect DC radio-controlled motor to terminals “UP” and “DOWN”. You can exchange “UP” and “DOWN” wires of the motor to change rotating direction of the motor. Set Momentary control mode: Do not conn...

Cell phone GSM Remote Control Smart Power Socket is brand new and high quality. You can control the GSM power socket through short messages or making a call. Control variety of home appliances and electronic products in any place worldwide by fixed telephone or mobile phone. Remote control air conditionings, electric heaters, water pump, motors, fans, servers, relay station, TVs, water heaters, electric doors, rice cookers, lamps, speakers or other equipments with voltage AC 110~220V. You also can feed the family pet via the GSM switch. Tri-Frequency: 850/1800/1900Mhz (North America version) or 900/1800/1900Mhz (Europe and Asia version) Password protection. 3 power output sockets.