1000M RF Wireless Vibrator & Beeper Kit

Vibrating alerts are primarily used when a user (deaf people or aged people) cannot hear the ring tone (a noisy environment or through hearing difficulty) or want s a more discreet notification. Vibrating alerts is used in mobile phones. If you put vibrator to a hard surface, it will be louder than a ringtone. In fact, we integrate vibration and beep function into one item. So we’d like recommend this kind of 1000m rf tri-mode wireless vibrator kit (12Z-06 & CB-12). It includes 12 vibrators and a 12-button transmitter. This vibrator kit’s transmission distance is about 1000m. There are four working modes in them. They are vibration, beep, vibration and beep.
vibrator kit
Here is the usage of vibrator kit.
The first step is learning.
  • 1) Press and hold the learning button of the receiver(vibrator) for about 5 seconds, then release the button when LED light is on, the receiver (vibrator)is in the status of Learning.
  • 2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.
  • If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.
  • 3) The receiver (vibrator) can learn several remote controls of different codes.
So the receiver (vibrator) will learn transmitter’s signal from its button 1 to button 12.
The next step is controlling.
Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.
Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.
Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.
Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.
Each button of transmitter can control one receiver.
structure of vibratorcircuit of vibrator

Comments

Post a Comment

Popular posts from this blog

Two way switch, or three way switch?

Image
Switches are classified according to the arrangement of their contacts in electronics. Electricians installing building wiring use different nomenclature, such as "one-way", "two-way", "three-way" and "four-way" switches, which have different meanings in North American and British cultural regions. If we say one-way switch in British cultural regions, it will be described as two-way switch in North American regions; and two-way switch will be described as three way switch and so forth. As a result, sometimes people will make misunderstanding about them. For example, people from USA say two-way light switch actually is called one-way light switch in UK. And if they don’t know the reason, they will get into a fight. Table below is to distinguish the difference between them. (Pole means separate circuit which are controlled by a switch. Throws means separate position that the switch can adopt.) Excellent two (three) way light switch from...
Read more

2 Channel DC Remote Controller Controls AC Motor to Rotate Forward and Reverse

This 2CH RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on. We will try to show you how to control positive and reversal rotation of an AC motor with this remote module.
Read more