Home Automation Control

This 6 channel rf remote control switch can be used to control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars, etc. 6 channel enables it to switch 6 electrical devices on and off. Remote distance is up to 500m. Three voltages include dc9v, dc12v and dc24v. This video aims to show how to control 2 AC motor.

A beacon is a light or fire on the hill or tower which acts as a signal or a warning to help guide navigator to their destination with safety. It is also lighthouse. One customer said, “I’m looking for a system which can remotely control (200m max) ignition of a lighthouse in 24 V dc”. We recommend him the model of single channel 24V power output RF remote (S1X-DC24-ANT2 +1CB-2). Single channel is for one device. 24V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field. There are 3 control modes. They are Toggle, momentary and latched. Setting control mode Toggle: Only connect Jumper-2. 1) Press big button: Turn on the relay. Press big button again...

The air horn is pneumatic device designed to create a remarkably loud sound for signaling purpose. Air horns are widely applied to vehicles, such as large semi-trailer trucks, fire trucks, trains, and some ambulances and ships as a signaling device. Someone would like to install air horn in his vehicle. Recently, one of our customers wants to remote control his air horn in his truck. He needs a momentary remote that he can honk a “LOUD” horn located outside the toolbox in the box of his truck. It is a pneumatic horn that needs approximately 125PSI air. The air has to be momentarily transferred to the horn using a solenoid. The solenoid is controlled by applying 110volts. The 110 volts is obtained by the 3000watt inverter that is also inside of the toolbox in the box of the truck. Our reply: We recommend the remote receiver model of one channel ac direct power output and one button transmitter (S1X-AC220+C-1). The being controlled devices can get power supply from the receiver direc...

This video aims to show the new firework ignitor system ignite cascade firework (S12PS1-ANT1+CB-12L) It can ignite various kinds of electric fireworks directly, or ordinary fireworks through fireworks electric igniter, which reduces accidents like skin burn and accidental explosions. One ignitor can light several fireworks at the same time.The ignitor can be remotely controlled from any place within a reliable distance; wireless signal pass through walls, floors and doors.

Someone needs a control system for controlling a DC 12v engine. He seeks to control the speed of rotation depending on the voltage applied. We recommend 2 channel motor speed adjustable remote controller —S2PFS-DC12 and CV-6-2. By comparison with other motor remote controller, this controller S2PFS-DC can control speed of motor rotation. It won’t depend on the voltage applied because two speed control knobs on the receiver are to adjust the speed of two motors separately.  You can control two engines by one remote controller simultaneously. Maximum working current is 10A for each channel. You may be wondering how it works. Let’s show you how to control speed of two motor rotations. 1 x 2 channel dc remote control receiver (S2PFS-DC12) 1 x 6-button remote transmitter (CV-6-2) 1 x dc12v power adapters 2 x dc motors Here comes the wiring. Motor 1 is supposed to be connected to terminals A1&A2 at receiver. Motor 2 is supposed to be connected to terminals B1&B2 ...

Sam is trying to design and build a remote switch system for his sprinkler system. He needs to use the sprinkler controller (12v output for on) to trigger a transmitter to switch a 12v operated valve on the other side of the yard (about 300m away.) He has mains power at both locations but the underground 12v wire from the controller has been damaged so he would like to build a remote system to save putting new conduit for around 300m across the yard. The easy part would be the receiver end because he would only need a 12v power supply. The hard part will be getting the transmitter to switch on when the sprinkler controller switches on (12v). We recommend direct power output high power long range remote control kit —S1PX-DC12-ANT2+CB-2V. The remarkable feature of this kit is that its transmitter is triggered DC power 5~28V input. That is to say, the transmitter will send out RF signal to receiver as long as it gets a 5~28V voltage from a device. Besides this advantage, i...

We are going to demonstrate that our 30 A high power remote controller controls high power motor to rotate in positive and reverse direction. This kind of controller is activated by dc 12v power supply with 30 A current output of each relay. It is very favorable for high power device. It also has four working modes including toggle mode, momentary mode, latched mode as well as momentary + toggle mode. First of all, let’s see material preparation. 1 x 2 channel dc high power remote control receiver (S2PU-DC12) 1 x 2-button remote transmitter (C-2) 2 x dc12v power adapters Some lines Secondly, see the wiring diagram below, B is normally open terminal; C is normally closed terminal and A is common terminal. Connect terminal C to the positive and connect terminal B to the negative. Terminal A is supposed to be connected to the motor. Note: The Power supply of receiver and motor must be provided individually in order to avoid interference between them. Switch on the power O...

This rf remote transmitter receiver works with three control modes: toggle, momentary and latched. You can control the receiver by transmitter from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. Applications include remote controlling light, motor, garage door, gate and so on with voltage of AC110~240V or DC0~28V. Controlling light, for example, you can work with toggle / latched mode. Toggle: press the button on transmitter, turn on the light; press the button again, turn off the light. Latched: press one button on transmitter, turn on the light; press another button, turn off the light. Widely used for outdoor light or LED light. Remote control kit with momentary mode is often used to control motor open/close for electrically operated door/lock/window/blind. Press and hold the button on transmitter, open the motor; release the button, close the motor. Other parameters: Coding Type: Fixed code by soldering Operating V...

This 2 channel rf remote control kit operates in toggle, momentary, latched and toggle+momentary mode (set the mode as you like freely). It is great for hard to reach lights or other DC/AC electrical devices. You can use it to control two same or different electrical devices. For example, turn on/off the light and open/close the door. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances . The video takes light control for example. More information please visit http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_245_270&products_id=124

This 6 channel radio remote control  kit operates in toggle, momentary and latched mode (set the mode as you like freely). You can use it to control at most 6 different electrical deivices. For example, turn on/off the light, open/close the door. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances. Delete stored codes: Press and hold the button of the receiver until the LED flashes twice, all stored codes are deleted successfully. At this time, remote control can’t control the receiver. Learning method and steps: Press and hold the button of receiver, then release the button when LED flashes once, the receiver enters into status of LEARNING. Press any button of 1, 2, 4 of remote control in 10 seconds, if LED flashes quickly and then off, it means LEARNING is successful. If LED flashes once after 10 seconds, it means LEARNING is failed and the receiver will quit the status of LEARNING. (The receiver can lea...