Home Automation Control

We recommend this kind of remote controller- dc rf remote controller kit with timer (S1D-DC12 & C-1), which operates in the 315/433 MHz frequency and is actuated by DC 6V, 9V, 12V and 24V. There is an adjustable resistor being installed in it. Working time of this remote controller can be adjustable between 2-40 seconds by using a screwdriver to twist the top of resistor. It can be applied to controlling lights, motors, fans, electrically operated doors/ locks/ windows/blinds/ cars or other appliances with voltage AC 110~240V or DC 0-28V. We’d like to show you the procedure of controlling dc led lamp.

This 1 channel dc RF remote control switch features in controlling relay off time delay. Delay time can be customized according to actual requirement. It is widely applied to control lights, motors, fans, electrically operated doors / locks / windows / blinds or other electrical devices. It is activated in 6V power supply. You need provide us with the delay time you want when ordering. E.g. delay time: 20 seconds or 1 hour or 20 minutes… The delay time is not adjustable freely. Its working current is 10ampere and working distance is 100m (300ft). It has normally open and closed contact. It controls various lights, fans or motors with voltage AC110~240V or DC0~28V. Here is the alternate current device wiring diagram and the wiring diagram of direct current device which not share the same power supply with receiver. Of course, if you want to remote control direct current device which shares the same power supply with receiver, you need to do some different wiring from above wiring. S...

Question from customer: I would like some help to make my Horn starting system become remote controlled. At present I have a momentary switch on a 12 foot cable when the switch is press it activates the horn. I would like the horn and housing to be separated. I would like the horn to be approximately 100M away. Which of your products will help me? In the future I would like to add a 2nd and 3rd horn to my set up which will be housed in separate boxes. Answer: If you want to remote control a horn, we recommend the long range 1 channel 12V momentary receiver (S1XM-DC12-ANT2) and the long range transmitter CB-1. It is direct power output; control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. Its working distance can reach 2000m with external extended antenna. ...

Question from customer: I want to put a 220V wireless switch to turn on / off the power of led lighting, this will make me a remote control switch . I want a basic on / off function product. Answer: 1 channel ac power input output remote control switch kit (S1X-AC220+C-2) is suitable for you. Its remarkable feature is ac power direct output, that is to say, you don’t have to supply additional power to being controlled device because it can get power from powered receiver.  It can long distance remote control AC 120V 220V electrical equipments, such as remote control lamps, strip lights, spotlights, outdoor lights, led lights, garden lights, motors, fans, pump, electric solenoid valves, and business signs.  You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance (about 100m); the wireless RF signal can pass through walls, floors and doors. Connect AC power to the input terminals "L"&"N" of the wireless swit...

When you want to remote control one more AC devices, you may think about 2 channel remote receiver. This kind of toggle 2 channel remote switch (S2T-AC110~240V + C-1) may be suitable for you. It is activated by AC110V~240V power supply. The maximum current output is 3 ampere. The Coding type of receiver is learning code. You can remote control any electric devices within 100M(No obstacles). Look at the following wiring diagram (1). We try to introduce 2 lamps controlling of this kind. First, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. Second, we connect the lamp 1 to the terminal “5” and the neutral wire. Third, we continue to connect the lamp 2 to the terminal “4” and the neutral wire. Toggle mode is the only working mode of this remote. So we can do the following operation. 1) Press button 1, turn on the lamp 1; Press button 1 again, turn off the lamp 1. 2) Press button 2, turn on the lamp 2; Press button 2 again, turn off the lamp 2....

The 1 channel RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used in US, Canada…; the other is AC220V (AC 200~240V), used in UK, France…. The Coding type of receiver is learning code. Maximum working current for each channel is 3 ampere. The working distance is 100M. You can control on/off, open/close of universal electrical devices. Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc. We will take ac light remote controlling for an example. Look at the following wiring diagram. From the interior analogue circuit, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. And then connect the lamp to the terminal “5” and the neutral wire. Actually, if you wire ac motor to the lamp position of following diagra...

S1XT-DC12+C--2 Wireless control, easy to install Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

A beacon is a light or fire on the hill or tower which acts as a signal or a warning to help guide navigator to their destination with safety. It is also lighthouse. One customer said, “I’m looking for a system which can remotely control (200m max) ignition of a lighthouse in 24 V dc”. We recommend him the model of single channel 24V power output RF remote (S1X-DC24-ANT2 +1CB-2). Single channel is for one device. 24V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field. There are 3 control modes. They are Toggle, momentary and latched. Setting control mode Toggle: Only connect Jumper-2. 1) Press big button: Turn on the relay. Press big button again...

It is the 12 V one channel latched mode remote control. It is also activated by 12V power supply. Paired with long distance transmitter CB-2, its working distance can be 1000m (3000ft). There is no need to go up and down the mast to turn device on and off. Using a remote controller to control device, it is very convenient to you. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. So the big button of this transmitter only turns on the device when you press. And the small button only turns off the device. We made a demonstration to show how to use this remote controller.

The air horn is pneumatic device designed to create a remarkably loud sound for signaling purpose. Air horns are widely applied to vehicles, such as large semi-trailer trucks, fire trucks, trains, and some ambulances and ships as a signaling device. Someone would like to install air horn in his vehicle. Recently, one of our customers wants to remote control his air horn in his truck. He needs a momentary remote that he can honk a “LOUD” horn located outside the toolbox in the box of his truck. It is a pneumatic horn that needs approximately 125PSI air. The air has to be momentarily transferred to the horn using a solenoid. The solenoid is controlled by applying 110volts. The 110 volts is obtained by the 3000watt inverter that is also inside of the toolbox in the box of the truck. Our reply: We recommend the remote receiver model of one channel ac direct power output and one button transmitter (S1X-AC220+C-1). The being controlled devices can get power supply from the receiver direc...

1 CH 100 m RF firework ignition system is more safer when we light up the firework. It reduces accidents like skin burn and accidental explosions. Firework ignition system really a safer device for firework ignition. We will try to ignite momentary firework with this kind of remote system.launching this momentary firework will be more dangerous because it is sparked in a second and its sparks can fly 2 meters high.  It is much safer method to ignite momentary firework. It contains 1-button remote transmitter and 1-channel receiver. Wire the momentary firework to the receiver, the momentary firework can be remotely controlled by remote transmitter from any place within a reliable distance; wireless signal pass through walls, floors and doors. Firstly, we should prepare some material. Look at the following picture below. There are firework system, one-button transmitter and momentary firework. Connect wire of momentary firework to black and red terminals on receiver. ...

This 1-channel rf remote control operates in the 315/433MHz frequency. It works with time delay control mode. Adjustable delay time can be 2~40 seconds. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V . More details visit http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=168&products_id=146