Home Automation Control

This wireless calling system has 99-channel mode among working modes. In this mode, one receiver host can works with 99 calling transmitters. The receiver should pair up with three or four-button transmitter . We’d like to show you the procedure. We prepare a receiver host, 4-button calling transmitters, manager remote and 9V power supply for receiver host. There are three steps to pair up transmitters and receiver host. Working mode setting: After switching on power, press and hold button 1 of manager remote for 2sec to enter setting menu, press button “3″ or “4″ to choose Cd8, press button 1 again to enter submenu of Cd8, press button “3″ or “4″ to choose “5″ (Mode 5: 99-channel mode), press button “2″ to turn back to setting menu. Calling button pairing: Press button “3″ or “4″ to choose Cd7, press button 1 again to enter submenu of Cd7, press button “3″ or “4″ to choose “001″, Press any button of transmitter (except “Cancel”), the speaker will sound “successful registratio

Question from Customer: “I am looking for a remote controller to start and stop a motor of 1/2 horsepower from a distance of 250 – 300 feet. The motor is 115 volts AC. Which unit is correct for this application?” Answer: We recommend 1 channel AC 30amps 2000m Remote Cont roller (S1PX-AC220-ANT2 & CB-2) to you. There are 3 working modes in this kit. They are toggle, momentary and lathed mode. You can choose momentary or latched mode. Momentary Mode : Only connect Jumper-1. Press and hold big button: Turn on the relay, terminal OUT outputs AC power, motor starts. Release big button: Turn off the relay, terminal OUT no output, motor stops. Latched Mode : Do not connect Jumper-1 and Jumper-2. Press big button: Turn on the relay, terminal OUT outputs AC power, motor starts . Press small button: Turn off the relay, terminal OUT no output, motor stops. The controller’s transmitting distance can be about 2000m in the open field. With its high amp load-30amp, it is enough stron

Question from customer: Recently, I am ready to manager a large new restaurant. I want to divide it into different areas so as to be convenient to customers and waiters. So I need some calling system to be used in restaurant for customers and waiters. The transmitter can be used by customer. The receiver can be put to reception desk. When there is customer calling from any area, he can press the button to notify the waiter and customer will get help as soon as possible. Answer: We recommend wireless calling system. They include a 999-channel receiver host . You can choose this 3-button calling transmitter . That is to say, you can pair up 999 transmitters with a 999-channel receiver host at most. This kit is multi-mode. According to your requirement, you can choose “Area mode”.