Posts

Showing posts with the label 12v

Lamp Automation Video

Image
We recommend this kind of remote controller- dc rf remote controller kit with timer (S1D-DC12 & C-1), which operates in the 315/433 MHz frequency and is actuated by DC 6V, 9V, 12V and 24V. There is an adjustable resistor being installed in it. Working time of this remote controller can be adjustable between 2-40 seconds by using a screwdriver to twist the top of resistor. It can be applied to controlling lights, motors, fans, electrically operated doors/ locks/ windows/blinds/ cars or other appliances with voltage AC 110~240V or DC 0-28V. We’d like to show you the procedure of controlling dc led lamp.

1 Channel Latched Mode Remote Controller

It is the 12 V one channel latched mode remote control. It is also activated by 12V power supply. Paired with long distance transmitter CB-2, its working distance can be 1000m (3000ft). There is no need to go up and down the mast to turn device on and off. Using a remote controller to control device, it is very convenient to you. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. So the big button of this transmitter only turns on the device when you press. And the small button only turns off the device. We made a demonstration to show how to use this remote controller.

One Transmitter Controls Four LED Lamps On and Off

The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. You also can choose external antennas for them. With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.  

12V RF Motor Remote Controller Run Forward Reverse

Image

2-Channel 12V RF Remote Control Transmitter Receiver 315/433MHz

Image
This 2 channel rf remote control kit operates in toggle, momentary, latched and toggle+momentary mode (set the mode as you like freely). It is great for hard to reach lights or other DC/AC electrical devices. You can use it to control two same or different electrical devices. For example, turn on/off the light and open/close the door. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances . The video takes light control for example. More information please visit http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_245_270&products_id=124